Hydrothermal Autoclave Reactor Price – 100 ml Size AUTOCLAVE HYDROTHERMAL REACTOR Price – Teflon Chamber Synthesis Vessel

The Hydrothermal Autoclave reactor use to carry hydrothermal reaction at high pressure and high temperature, which adopts the external heating mode, is a kind of closed container to dissolve the refractory material .

Our Teflon Lined Hydrothermal Synthesis Autoclave is widely used in new materials, energy, environmental engineering and other fields of scientific research and experiments, it is a small commonly used reactor used in teaching and scientific research.

Features

1. Place the Autoclave and sterilizing material on the table.
2. Release the screw type threaded primary SS cap in an anticlockwise direction until it has been opened.
3. Lift the top lid and take-out the reaction chamber.
4. Fill solvent (as per liner’s capacity) in the reaction chamber and sealed it. Make sure that the cap should be air-tight to avoid pressure leakage.
5. Place the liner in a stainless steel chamber.
6. Keep top gasket over the vessel and make sure that the vessel placed properly in the Stainless Steel chamber.
7. Then twist primary SS cap in a clockwise direction until it does not turn anymore.
8. The secondary SS cap has been given at the top of the primary cap for extra tightening to avoid pressure leakages.
9. Rotate primary SS cap in the clockwise direction with the help of locking rod for additional tightening.
10. Placed the hydrothermal autoclave in oven or furnace and heat it till reactor’s safe temperature.
11. Increase the temperature of the oven and set heating rate 5℃/minute only.
12. A researcher can heat the hydrothermal autoclave till 180℃ for safe use.
13. After completion of the hydrothermal synthesis reaction, the autoclave’s cooling rate will be 5℃/minute.
14. Make sure that, after completion of the process clean the liner properly for reuse.

• 1.Hydrothermal Autoclave Reactor / vessel with Teflon Chamber with pressure gauge
• (1). Operating temperature:≤240℃
• (2). Working pressure: ≤6MPa (gauge)
• (3). Heating, cooling rate: ≤5℃/min
• 2. High temperature high pressure reactor with Teflon Chamber
• (1). Operating temperature:≤400℃
• (2). Working pressure: ≤60MPa (gauge)
• (3). Heating, cooling rate: ≤5℃/min
• 3. Digital constant temperature reactor with Teflon Chamber
• (1). Operating temperature:≤200℃
• (2). Working pressure: ≤6MPa (gauge)
• (3). Heating, cooling rate: ≤5℃/min
• 4.Hydrothermal Autoclave Reactor with double Teflon Chamber
• (1). Operating temperature:≤220℃
• (2). Working pressure: ≤6MPa (gauge)
• (3). Heating, cooling rate: ≤5℃/min
• 5. Gas connection type reactor with Teflon Chamber It equipped with a high-pressure hose so one end can connect with     Nitrogen. Hydrogen , ammonia or argon gas cylinder.
• (1). Operating temperature:≤240℃
• (2). Working pressure: ≤6MPa (gauge)
• (3). Heating, cooling rate: ≤5℃/min